CARGO HOLD REFURBISHMENT IN CHINA28/01/2019 10:00
A large cargo hold located on a bulk carrier required to have 10-15% steel replacement, with the remainder of the hold requiring to be recoated during a dry-docking in China.
There could be no disruption to other ongoing maintenance work during the dry-docking. Grit blasting was therefore not permissible and a solvent-free coating system was required to be applied.
Chemco additionally offered a unique solution whereby a 'cherry picker' could be utilised to assist with the surface preparation and coating works. This allowed further time and cost savings to be achieved as scaffolding was not required.
Environmentally friendly water jetting was utilised as the surface preparation method. This was followed by one primer coat of solvent-free, wet & rust tolerant Epo-chem™ RS 500P.
Applying Primer Coat of Epo-chem™ RS 500P
To complete the coating application, one topcoat of solvent-free, wet tolerant, glassflake reinforced Epo-chem™ RA 500M was applied.
Applying Finishing Touches
Utilising water jetting and a solvent-free coating system ensured that the client achieved substantial time and cost savings as other maintenance work could continue nearby without disruption. This also allowed the vessel to return to charter much quicker than would have been possible utilising conventional paint systems.
The following benefits can be achieved by utilising this unique coating system:
- No grit blasting requirements
- No scaffolding requirements
- Quicker return to service
- No disruption to other ongoing work (including hot work)
- Can be applied in any environmental conditions
- No overcoating limitations
For more information on these two revolutionary products, please click on the product name below:
Enter your details below and we'll get back to you as soon as possible.